Lamphead
Optical System Soft Diffusion Panel
Light Aperture 645 x 300 mm / 25.4 x 11.8
Beam Angle 115º (Half Peak Angle)
Weight
Manual Version: 12.8 kg / 28.2 lbs
Pole Op Version: 14.1 kg / 31.1 lbs
Handling Aluminium Yoke, High Strength Tilt Lock, Pole Operation Option (Pan & Tilt)
Mounting 28 mm Spigot (Junior Pin)
Tilt Angle +/- 90°
Lamphead Voltage Input 48 V DC
Power Consumption 420 W Nominal, 450 W Maximum
Lamphead Power Connection Male 3-Pin XLR to 15 Amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector Male 4-Pin XLR to 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range 23 to 36 V DC
Battery Mode Light Output 50 % of total output
White Light 2,800 K to 10,000 K continuously variable correlated color temperature
Colored Light Full RBG+W color gamut with Hue and Saturation control
Color Temperature Tolerance +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition
CRI Average > 95
TLCI Average > 90
Green-Magenta Adjustment continuously adjustable (Full Minusgreen to Full Plusgreen)
Dimming 0 to 100 % continuous
Control
On-Board Controller, 5-Pin DMX In and Through,
EtherCon LAN network connectivity, USB-A, Art-Net
Remote Device Management
(RDM)
DMX Setup, Hour Counter and Standard RDM commands
Software Interface
Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac
USB-A: Software Upgrade via flash drive
Housing Color Blue/Silver, Black
Ambient Temperature Operation -20 to +45º C (-4 to +113º F)
Protection Class / IP Rating III / IP20
Estimated LED Lifetime (L70) 50,000 hours
Estimated Color Shift Over
Lifetime (CCT)
+/- 5 %
Certifications CE, CB, ENEC, cNRTLus, FCC, PSE
Power Supply Unit
Power Supply Input Range 110 to 240 V ~, 50/60 Hz
Power Supply Output Range 48 V DC
Power Input Connection powerCON TRUE1 (Bare Ends / Schuko / Edison cables available)
Power Output Connection
Female 3-Pin XLR to 10 Amp (Pin 1: Negative / Pin 2: Positive)
powerCON TRUE1 (mains power through)
Weight 3.5 kg / 7.7 lbs
Dimensions 383 x 191 x 91 mm / 15.1 x 7.5 x 3.6
Control On-Board On/Off Switch
Mounting SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter
Certifications CE, CB, ENEC, cNRTLus, FCC