The DJI Inspire 2 Quadcopter boasts an impressive flight time of up to 27 minutes with an even more impressive control range of 7 kilometers (approximately 4.3 miles). It was designed to capture 5.2K video in CinemaDNG RAW, Apple ProRes and more. From 0 to 50 in 4 seconds, with a max speed of 67mph, the Inspire 2 has speed and agility as of yet unseen in an aircraft this size.
DJI Inspire 2 (CP.BX.000166) Includes:
DJI Inspire 2 Quadcopter
Remote Control (Transmitter)
(4) Propeller Pairs
(2) Intelligent Flight Battery
Vision System Calibration Plate
(3) Gimbal Damper
Propeller Mounting Plates
(4) Battery Insulation Sticker
A dual battery system prolongs the flight time to a maximum of 27 minutes (with an X4S), while self-heating technology allows it to fly even in low temperatures. FlightAutonomy has been revised and developed specifically for the Inspire 2,providing two directions of obstacle avoidance and sensor redundancy. Increased intelligence adds multiple intelligent flight modes, including Spotlight Pro, giving even single pilots the ability to create complex, dramatic shots. An upgraded video transmission system is now capable of dual signal frequency and dual channel, streaming video from an onboard FPV camera and the main camera simultaneously, for better pilot and camera operator collaboration.
CineCore 2.0. The DJI Inspire 2 uses a new image processing system, CineCore 2.0, built into the aircraft nose. It works with any camera connected through the dedicated gimbal port, but was optimized for the Xenmuse X5S and X4S – capable of recording up to 5.2K and 4K respectively.
CineCore 2.0 can record in the following formats:
Sense and Avoid. Forward and downward vision systems enable the Inspire 2 to detect obstacles up to 30 meters ahead, allowing for protected flight at up to 34mph (54kph) at a controllable attitude angle of 25°. Upward facing infrared sensors scan obstacles 16ft (5m) above, adding protection when flying in enclosed spaces. Obstacle sensing systems are active during normal flight, RTH and all Intelligent Flight Modes. These sensors are core components of the DJI FlightAutonomy system.
Spotlight Pro. The Inspire 2 uses a powerful tracking mode, Spotlight Pro, that uses advanced visual tracking algorithms to lock onto a subject during flight regardless of the direction it flies. If the gimbal comes close to reaching its rotation limits, the Inspire 2 itself will rotate in the same direction without affecting flight control or the shot.
Smart Return to Home. Forward and downward vision systems allow the Inspire 2 to createa real-time map of its flight route as it flies. If the video transmission system signal is lost and Smart Return Home is enabled, it is able to fly home along its original route, and change to a straight line when it regains a signal. As it returns, it will use the primary camera to identify obstacles as far as 200m in front, allowing it to plan a safe route home. It is also able to reconnect more quickly after losing connection.